Facebook

Thursday, 13 July 2017

Birthday wishes

Hello again!
Yet another CAS card with the Paper Smooches stamp set "We adore you"


I stamped the image from the stamp set on a white cardstock. 
Coloured it and cut it in a strip to fit the width of my card. 
Mounted this on a base CS. 
Stamped the sentiments on the card.

There! This was a real quick card!!

Few more looks -



 Thank you for dropping by



Linking this card to the following challenges
papercraftcrew - My stamp set
Join the Paper Craft Crew Theme Challenge #250. Play along at www.papercraftcrew.com #themechallenge #pcc2017 #craft


We are so grateful!!!

Hello!! 
A card over my blog today. 
Finally, managed using the stamp set I have been hoarding for the past 1 month. 

A Paper Smooches stamp set.

Here's a look at my card.




I stamped the image from the "We adore you" stamp set from Paper Smooches on a white cardstock. 
Coloured the image with pencil colours. Die-cut the image using DCAM circle die. 
Took a Textured white card as my base. Cut a small strip of pattern paper and adhered it along with a thin strip of washi tape on the base CS. 
Mounted the die-cut image on the card with foam adhesive. 
Stamped the sentiment and mounted it overlapping the image with foam adhesive. 
Later, die-cut small hearts from Paper Smooches Tiny Hearts die set. 
Adhered 3 hearts together to form dimensional hearts. Placed them on the card. 
Lastly coated the hearts with Glossy accents.

Few more pics - 





Thank you for dropping by.


Linking my project to the following challenges
Paper Smooches - Anything goes


getcreativechallenges - CAS
papercraftcrew - My stamp set
Join the Paper Craft Crew Theme Challenge #250. Play along at www.papercraftcrew.com #themechallenge #pcc2017 #craft

Tuesday, 11 July 2017

Sketch card.

Hello, Friends.. 

I have three cards here on the blog today
All the three cards are based on a single Sketch.

Let's have a look one by one.

CARD 1




For the semicircle BG, I began with blending blue and green DI till I got the desired effect and Die-cut the semi-circle shape. 

Took a white cardstock and mounted the pattern paper on it such that a 1/2" small section of the white CS is seen. 

Next mounted the die-cut semicircle on this with foam adhesive. Die-cut the birdhouses and birds using MFT birdhouses. Adhered them to the semi-circle. 
Lastly stamped and heat embossed the sentiment and mounted it on the card.

Few more pics of the card




CARD 2


 The semicircle BG in this card was again done using DI blending over heat embossed stars and some white paint splatters. Later die-cut into the semicircle shape. 
On a white CS a textured cardstock is mounted leaving a 1/2" white CS margin. Next mounted the semicircle on this with foam adhesive. Stamped, coloured and mounted the Owl on the card using foam adhesive. Lastly, stamped and heat embossed the sentiment using foam adhesive.
The Owl and sentiment from the MFT Owl Yours stamp set.

 Few more pics 





CARD 3

Last card and my Favourite of them all.


I used a Light blue coloured textured CS mounted on a white card as the base for this card. Die-cut a semicircle on a white CS. Mounted it on the base so that the semicircle die-cut looks through the blue paper underneath. Stamped and coloured the fence, pig, flowers, etc. from the MFT Hog Heaven stamp set. Assembled the fence and the pig over the semi-circle using foam adhesive. Mounted the heat embossed sentiment using foam adhesive. Adhered the flowers and a bird over the card to add elements. 

Few more pics





Like I mentioned the last one is my favourite. Which one did you like more?

It was a pleasure having you here. Thank you for dropping by.

Entering my project in the following challenges

Wednesday, 5 July 2017

Birthday LO

Hello, Crafters!

It's time for a new challenge at Craft Rocket challenge blog

The theme for the challenge is Anything goes

For a change, this time I made a layout (instead of a card) as my DT inspiration. 





For the layout, I took a lime green coloured textured cardstock (8"x8") as my base. Cut strips from few other colourful patterned paper. Layered them at various levels and mounted them on the base CS. Stuck strips of colourful washi tapes at one side. Adhered a sentiment from a paper pack at the bottom.
 I die-cut the main sentiment from Tim Holtz Sizzix Celebration Words Script Thinlit dies. Layered 3 die-cuts over each other to form a thick sentiment. I fussy cut, 2 layered, top banner and adhered it in a slant fashion. Adhered a blank white CS to hold the photograph (I have actually made this layout for someone but didn't want to give it out by adding his photo right now. :-)) Mounted the sentiment. 
Lastly, added some stickers and die-cuts to complete the project. 


Hope I could inspire you to make something different. 
Thank you for dropping by. 
Do hop over the Challenge blog and check out other wonderful inspirations by other DTs.





Monday, 3 July 2017

Christmas in July

Hello!!
A New Challenge begins today at Fabrika Fantasy.

Theme for the challenge is "Christmas in July"

Here's my DT inspiration for the same.


I have used Young Marguerite for this card.

It's a wonderful image to work with. Do check it out at the store

I coloured the Digi and fussy cut it. I mounted Christmas coloured pattern papers on a white CS. Tied a golden with red lace on the overlap of the papers. Stuck to leaf die-cuts on one side and mounted my Digi onto it with foam adhesive. Adhered a sticker of the bells/holly leaf on one corner. Stuck few flowers to add some element. Lastly added a sentiment to the card.

Here's another look of my card.


Do drop by the challenge blog to check out some more amazing work and inspirations from my other DT friends.

And do not forget to participate in the challenge. Would love to see what you all come up with.


Entering in the following challenges

Cool Chicks

Hello, Crafty peeps!

Today begins a new Challenge at A Perfect time to Craft challenge blog.

Theme is always "Anything goes"
Come along and join in the challenge!!

Our sponsor for month of June is Sparkle n Sprinkle

No automatic alt text available.

Kindly support our sponsor and visit their shop here

No automatic alt text available.


Join them on Facebook here

No automatic alt text available.

Image may contain: text


The digi I have used for my project are the "Cool Chicks". Here's a link to the image.

Digital Stamp Set 725 Cool Chicks  [Digi725b]

Here is my DT inspiration for the same.

Some TAGS with the images!!!


I coloured the digi with some pencil colours and fussy cut the images seperately. I took some ready tags from Darice from my stash. Die-cut grass in two shades of green. Mounted the grass layers and the cool chicks, at different levels, on three different tags individually. Stamped sentiments on each. Added few sequins to add some elments. Lastly tied a twine through the punched hole. 

There the tags are ready!!!



Individual Pictures 




Hop over the blog to check out the inspirations by my other DT friends. 

And Do not forget to participate in the challenge.




Entering in the following chalnege
cutecardthursday - Anything goes
simonsaysstamp - WEdnesday challenge - Anything goes

Wednesday, 28 June 2017

CAS Coffee cards

Hello Crafters,

The Summer Coffee Lovers Blog Hop is on...

Here are my cards for the same.

Card 1



For this card


  • I stamped the Coffee Cup along with the vapours. Coloured them and fussy cut it together.
  • Lightly mark the placement of the Coffee cup on the white card panel.
  • Stamped coffee beans around the same and colour them. 
  • Mount the Coffee cup onto the panel with foam adhesive.
  • Mounted the sentiment with foam adhesive.
  • Adhered this white panel on a white cardstock.






  • Card 2


    For this card
    • I began stamping the Coffee cup repeatedly on a cream coloured cardstock with brown ink.
    • Stamped the Coffee cup with black ink on a white CS. Coloured the image and fussy cut it. 
    • Mounted this on the cream card with foam adhesive.
    • Stamped the sentiment and mounted it with foam adhesive. 

    Thank you for dropping by!!

    Entering this in the following projects